Easy Laser Applications
New Vibrometer - Shows vibration level in "mm/s" or "inch/s" and bearing condition value in "g". - Requires Optional Probe
Horizontal 9-12-3 - For the alignment of horizontal machines by the 9-12-3 method.
Soft Foot - With this program you check so that the machine is resting on all feet. Shows which foot should be corrected (if necessary)
EasyTurnTM - For the alignment of horizontal machines. Allows complete measurement with only 40" rotation of the shafts.
Cardan - Shows the angular errors and adjustment value on cardan-shaft-coupled/center-offset machines. (Requires accessory fixtures.)
Vertical - For measurement of vertical and flange mounted machines.
Machine Train - For the alignment of two to ten machines in a row (nine couplings). The entire alignment can be followed live on the screen.
RefLockTM - Any pair of feet can be locked/set as a reference. This is a sub-function in the machine train program.
Thermal Growth Compensation - Compensates for difference in thermal growth between machines. This is a sub-program in the machine train program.
Offset and Angle - Shows center offset and angular error between two shafts, for example. Also suitable for dynamic measurements.
Values - Shows live readings from S- and M-unit. Can be used for shaft alignment, straightness measurement and dynamic measurement. Up to four detectors can be connected in series and be zeroed individually.
Straightness - For straightness measurement of (for example) machine foundations, shafts, bearing journals, machine tools, etc. Can handle up to 150 measuring points with two zero points.
Flatness - Program to measure flatness/twist of (for example) machine foundations, machine tables, etc. Handles up to 300 measuring points with three zero points.
Squareness - For measurement of squareness in machines and installations.
Parallelism - For measurement of parallelism between rolls, machine ends, etc. Can handle up to 150 rolls/measurement objects. The baseline or any roll may be used as a reference. Every object can be individually named.
Spindle Direction - For measurement of the pointing direction of machine spindles machine tool, drilling machines, etc.
Center of Circle - Used for straightness measurement of bearing journals when the bore diameter varies. For example diesel engines, propeller shaft installations, ect.
Half-Circle - Readings are taken at three positions, for example 9, 6, and 3. Allows varying bore diameters. To be used together with the Turbine system.
Plumb Line - With this program you measure plumb (vertical) and straightness of turbine and generator shafts, for example.
Flange - For flatness measurement of flanges and circular planes, slewing ring bearings for example. Can handle up to 150 measuring points. Three zero points at 120° pitch are computed by the system.
BTA Digital - For alignment of belt and chain drives. (Requires accessories BTA Digital transmitter and detector unit.)
Shopping cart software
and credit card processing provided by ezimerchant