The Hawkeye receiver is designed to be used with rotating lasers. The receiver includes built in magnets to mount on various grading and excavating machinery. A clamp is also included to be used on grade rods for general purpose grade checking and elevation control. Battery life is 160 hours with 2 x 'AA' alkaline batteries.

Click on image for details.

MCR1 360 degree receiver, 178mm vertical reception window, 5 channel of grade position, 610m operating range (depending on laser), 75minutes auto shut off with no laser beam, 3-4 hr recharge time

MCR2 360 degree receiver, 7 channels of grade position, 170mm vertical reception window, 610m operating range (depending on laser), ±2.5° plumb swing range, 75 minute auto shut off with no laser beam, 3-4 hours recharge time

MCR3 360 degree receiver, 8 channel of grade position, in-built plumb indication, plus new Angle Compensation for Excavators (ACE) for grade checking at extended dipper arm swing angles, 610m operating range (depending on laser), 222mm vertical reception window, plumb swing range ±2.5° (std) or ±10° to ±30° (ACE)

Hard Case Only.

Automatically maintains the cutting edge or digging depth of construction and agricultural equipment when used in conjunction with hydraulic installation kits, solenoid valves and electric cable kits. LED display indicates the position of the blade. Can be used with MCR2, MCR3 and new MCR2E. Will control true proportional current, proportional voltage and on/off solenoid valve for fine grading applications. Includes: 7.6m power cable and mounting bracket.

Control Box & Cable Set. Automatically maintains the cutting edge or digging depth of construction and agricultural equipment when used in conjunction with hydraulic installation kits, solenoid valves and electric cable kits Can be used with MCR2 and MCR3 Receivers only Includes 7.6m cables - power cable, receiver cable and valve cable

Connected to MCR receiver by coil cord (removable wiring). Includes 7.6m long cable to run from Junction Box to Control Box in cab (fixed wiring). Acts as a safety box to allow user to remove the MCR receiver from machinery for standalone applications without having to disconnect a fixed wiring harness and leaving a loose coil of wire.

Coil cord to go between MCR receiver and Junction Box (above) Extended length of cord is approximately 5metres.

• Shock mounted, telescoping mast for mounting the MCR receivers on machinery - bolted/welded in place (no magnets).
• Mast allows the receiver to be positioned above the machinery for unobstructed laser reception.
• It has a 1.2m telescoping adjustment range with a metric scale for positioning at known elevations.
• Built-in shock mounts on all four sides provide excellent damping of the receiver in rough operating conditions
• Height when retracted 192cm
• Extension length 122cm
• Available in red or yellow (please specify when ordering).
• Weight 23.6 KG. Freight cost applies.

(Is included with CB24 & CB26) A bracket for mounting the control box in cab. Notches accept control box knobs and there are two holes predrilled on the bottom of bracket for mounting to the machine.

If the MCR is disconnected for some reason the extra cable will have to be coiled up and stowed securely

Model # MP1 MagnaPlumb

Magnetic attachment that indicates plumb/vertical and is used to tell the operator the boom of excavator is vertical

Fits on all machinery metal arms Level indication through 2°

LEDs visible from both front and side Approx 200 hours battery life

Magnetic Mount, quick, secure mounting with no welding. Heavy duty magnets keep receiver in place, Large receiver adjustment range.

Remote Display - allows receiver to be viewed in cab.

Plumb Sensor

TEMPORARILY UNAVAILABLE ITEM 

TEMPORARILY UNAVAILABLE ITEM 

The Apache BULLSEYE3 laser receiver is a rugged electronic sensor that detects both invisible and
visible beams of varying powers and size and will work with nearly all models of rotating lasers. When mounted
on an earthmoving machine the Bullseye3 gives the operator a visual indication of which direction to move
the bucket or blade.

TEMPORARILY UNAVAILABLE ITEM