|
|
Current Category
Line & Dot Projection Lasers > Z-LASER CORDLESS LINE LASERS Z1A to Z5A
Z-LASER ZA CORDLESS LASERLINE
$$$$ BULK BUY PRICING AVAILABLE ON ALL Z-LASER ZA CORDLESS LINE LASER GUIDES, LASER ALIGNING & MEASURING TOOLS, DISTANCE CALCULATION LASERS, ACCESSORIES & TOOLS ASK A GSR REP TODAY $$$$$$
| |
Z3A Accessories Required |
Z3A Accessories Required |
Z5A Accessories Required |
Z3A Accessories Required 174 |
Z3A Accessories Required 274 |
Z3A Accessories Required 301 |
| |
Accessories: Laser Z3A, mounting H3-20 |
Accessories: Laser Z3A Plus, mounting H3-20 |
Accessories: Laser Z5A, mounting H3-20 |
Accessories for Elu circuit saw 174 and DeWalt 701V. Accessories: Z3A, H2-20, fitting panel and screws for ELU saw |
Accessories for Elu circuit saw 274 and DeWalt 707V. Accessories: Z3A, H2-20, fitting panel and screws for ELU saw |
Accessories for Elektra Beckum circuit saw KGS 301. Accessories: Z3A, H2-20, fitting panel and screws for Elektra Beckum circuit saw KGS 301 |
| Projection |
Line: 0,5 m (for a 0,4m Abstand) |
Line: 1 m (for a 0,4m distance) |
Line: 2 - 3 m (for a 1m distance) |
Line: 0,5 m (for a 0,4m distance) |
Line: 0,5 m (for a 0,4m distance) |
Line: 0,5 m (for a 0,4m distance) |
| Lifetime (at approx. 23º) |
100.000 h |
100.000 h |
80.000.h |
100.000 h |
100.000 h |
100.000 h |
| Output power |
3 mW |
3 mW |
5 mW |
3 mW |
3 mW |
3 mW |
| Wavelength |
645 |
635 |
635 |
645 |
645 |
645 |
| Laser class |
2 |
2 |
2M |
2 |
2 |
2 |
| Dimension |
Ø 20 x 110 mm |
| Working temperature |
minus 10º C to plus 45º C |
| Supply |
1 Mignon AA- battery 1,5 V or NiCd Accu 1,2 V patented |
| Housing |
Plastic, protection class IP 64 (with unscrewable battery case) |
| Operating time |
approx. 20 hours with a battery |
| Line width |
approx. 1 mm | |
| The members of the Z-A laser product family are suitable for universal use because they are compact and have an internal power supply, comprised of one single battery. Connection to an external transformer or power supply is not necessary, which means no cable is in the way whilst working. The modules have a handy On/Off switch, and installation of the laser can be completed within minutes. The type H3D mounting bracket is a recommended accessory, with a ball & socket joint to enable the laser to fit almost any machine.
The standard product of this family is the model Z3A (as in the above figure), which has 3mW of output power. The laser projects an intensive red line of about 1m length and 1mm width. The Z3A was designed for smaller machines (e.g. circular cross-cut saw, mitre saw, band saw and small stone cutting machines), and its precision will allow you to simplify your work practices. Furthermore, the "Cableless" will save time (no test cuts are necessary!), allowing you to achieve perfect quality and, last but not least, will significantly increase safety in the work place
Please note that the prices below are for the laser only, you will need to add $220 Including GST for the external power supply, Aluminium mount and fitted cable.
Refer to the model numbers in the above table and order your mount. |
Shopping cart software
and credit card processing provided by ezimerchant
|