|
|
Current Category
Line & Dot Projection Lasers > Z-LASER LINE LASERS Z5P to Z30P
ZLASER THE CHAMPION LASERLINE
$$$$ BULK BUY PRICING AVAILABLE ON ALL Z-LASER THE CHAMPION LINE LASER GUIDES, LASER ALIGNING & MEASURING TOOLS, DISTANCE CALCULATION LASERS, ACCESSORIES & TOOLS ASK A GSR REP TODAY $$$$$$
| |
Z5P Accessories Required |
Z10P Accessories Required |
Z15P Accessories Required |
Z20P Accessories Required |
Z30P Accessories Required |
| |
Accessories: Laser Z5P, mounting H1-40 |
Accessories: Laser Z10P, mounting H1-40 |
Accessories: Laser Z15P, mounting H1-40 |
Accessories: Laser Z20P, mounting H1-40 |
Accessories: Laser Z30P, mounting H1-40 |
| Projection |
Line: 2 -3 m |
Line: 3 - 5 m |
Line: 4 - 6 m |
Line: 5 - 7 m |
Line: 9 m |
| Lifetime (at approx. 23º) |
40.000 h |
20.000 h |
25.000 h |
30.000 h |
30.000 h |
| Lifetime (at approx. 50º) |
7.000 h |
4.000 h |
4.000 h |
4.000 h |
4.000 h |
| Laser power |
5 mW |
10 mW |
15 mW |
20 mW |
30 mW |
| Wavelength |
635 nm |
| Dimension |
Ø 40 x 250 mm |
| Laser class |
2M |
| Working temperature |
minus 10º C to plus 50º C |
| Supply |
85-265 VAC, 47-63 Hz, 10 Watt, Protection 500 mAT, shielded acc. to EN 50081/82, 2m plug line cord |
| Housing |
tightly shut plastic pipe, protection class IP 64 | |
| The "Champion" projects an intense and very sharp red line from 2m (Z5P) to more than 9m (Z30P) in length, thus simplifying the positioning of workpieces for many saws in wood and stone industries world-wide. Despite its small outer dimensions of only 40mm diameter and 250mm length, the "Champion" features an integrated wide input range power supply with input filters, allowing operation from 85-265 VAC, so that safe and stable local or global use is guaranteed. Thanks to the integrated cooling system (Peltier element), the temperature is stabilised at 23°C, therefore ensuring a long life of the laser. In addition, a temperature sensor protects the laser and switches it off in emergency situations (overheating).
The robust H1P bracket allows the laser to be easily mounted on any shaft with a 20mm diameter, and can quickly be adjusted, both vertically and horizontally. We offer this bracket, together with the H4F panel saw mount (or the alternative H3 wall/ceiling mount) and a "Champion" laser, in a competitive and ready to connect set. Additionally, many other different projections can also be achieved with the use of other optional diffractive optics. These flexible application possibilities and the high quality of the Z-P family are some of the reasons for the well-deserved status as our "Champion" and best seller.
Please note that the prices below are for the laser only, you will need to add $220 Including GST for the external power supply, Aluminium mount and fitted cable.
Refer to the model numbers in the above table and order your mount and power supply. |
Shopping cart software
and credit card processing provided by ezimerchant
|