Electronic display, removable for the use as slope level, switching between percent/degree/related slope.
Accuracy 0,2°, 9V Battery, target colimator for aligning the x-axis, 5/8" thread. For all construction
lasers with switchable auto/manual function.

Tilt angle 90°,
printed scale in % and degrees,
increments: 1°/ 2% (0-20%)and 5% (20-100%),
quick release clamp,
5/8" thread.

Engraved scale in stainless steel,
scale in % and degree,
readings from 0 to 100% or 0 to 60°,
increments: 1°/%,
target colimator for aligning the x-axis,
5/8" thread.
For all construction lasers with switchable auto/manual function.

Same as above, with additional fine adjustment screw for aligning the laser plane of vertical lasers.

Adjustment range 300 mm, 5/8" thread on the plate and on the aluminium angle to adapt magnetic and post brackets or for vertical mounting on tripods.

To mount the wall mount bracket (above) to piles and posts with belts and wrench.

With self-locking elevation crank-up and screw clamps.
Clamp length 500 mm. To mount any Laser or Surveying Instruments to doors and door panels,
safes space against tripods, quick and easy set-up of the units,
insensible during vibrations, ideal for stone floor.

For mounting and aligning vertical lasers to be used with scaffolding bracket or the 90° adapter plate.

For fine line adjustment of the laser axis in vertical operation,
5/8" thread,
detachable plate with quick clamp release,
for all tripods, reference-line bracket etc. compatible.

For sliding the laser plane with vertical lasers forth and back,
5/8" thread, detachable plate with quick clamp release,
compatible for other brackets,
sliding range 110 mm.

DISCONTINUED ITEM 

For direct attachment of the Spectra 1452 Series / Litehouse 3 Lasers to wall or sloped ceilings.